Medlin Drone single-axis "Timing Belt" FPV gimbal designed to mount to a Freefly Alta X. This kit comes preassembled and configured!
This gimbal improves your ability to navigate complex environments and track subjects, allowing full view above and bellow the craft. It can be controlled via a dial/slider, head tracking, and various other methods.
Optionally includes 'AIO' housing that is active-cooled and can be mounted/stacked directly underneath the gimbal and is a convenient way to house the VTX and various other components, if you prefer that over mounting inside the fuselage of the Alta itself. Cooling fan is powered by the same power source as the servo with an included power splitter cable. There are antenna mounts included that are integrated into the lower spacers and can be located in several different configurations.
This product is designed to support a wide range of configurations and customization. In addition, the base plate and AIO designs are open-source to allow even further customization, if desired.
Works with DJI O3 and O2, Analog, Walksnail Avatar, HDZero, etc. Depending on your setup, you may require a FPV camera extension cable.
Please Note: To power the servo you will need 5V and ground, we sell a 5V Regulator/BEC.
Required:
-Soldering tools
-A means of controlling the servo via a PWM signal, such as a fight controller running Betalight, iNav, or another Cleanflight variant, with available LED pin or unused motor output pin and available 5v and ground pins. Or, if using TBS Crossfire or another receiver with ability to output an individual PWM signal, a spare output pad it can be used instead of the flight controller to control gimbal.